You are here
Easy Grid Ground Reinforcement Grid
Strong, lightweight and easy to install, Easy Grid is a ground stabilisation system that provides a stong and solid base for a variety of uses.
Versatile interlocking base for sheds, greenhouses, cabins and driveway installation.
Suitable for any areas needing ground or grass protection.
Infill with gravel, sand, soil or grass.
Soil erosion prevention.
Eco-friendly and lightweight. Made from 100% recycled material, and recyclable.
Quick and easy to install
Lightweight, slip resistant, crack proof, frost and UV resistant.
Tested with a compression strength of up to 300 tonnes.
Supports up to 397 tonnes per m² filled.
1 pack covers 1m² and consists of 9 x interlocking grids of 33x33cm. 40mm depth.
Where stone/gravel finish is required:
A suitable geotextile should be laid on top of the sub-base to act as a separating layer/weed suppressant. The laid grid can be filled with your chosen aggregate.
Where a grassed finish is required:
Fill the EASYGrid with topsoil. This can then be seeded or turfed (turf may need compressing into the grid to maintain a level surface).
The performance of EASYGrid as a driveway or parking area is dependent on the quality of the sub-base installation. The ground under the grid must be able to withstand the forces put upon it. EASYGrid acts a ground stabiliser and gravel containment product. When installed correctly it will aid weight distribution and reduce rolling and rutting caused by vehicles.
Product available in the following;
|EG||Easy Grid Black 1m²|
Please note that not all items are stocked at all branches. Please call to check stock availability before making a special journey.